[Rhodes22-list] CB Pennant drain

[Jesse Shumaker]

Mark, thanks for sharing.

On my 1991 R22, it appears that the CB pennant hoses are aft of the cabin
and forward of the cockpit so they are hidden from view.  If I had to
access that, I assume that I would need to cut out a panel of the
fiberglass at the aft of the cabin.  Has anyone on the list done that?  I
ask because I'm going to be replacing my centerboard pennant at the end of
the season.  I plan to use a messenger line to accomplish this and plan to
leave the existing hoses in place but in case that goes poorly, it would be
good to have a backup plan.

Jesse Shumaker
S/V Zephyr

On Thu, Aug 13, 2020 at 8:21 AM Mark Whipple <mark at whipplefamily.com> wrote:

> Just in case you wanted to know the rest of the story:
>
> Yesterday I finally got around to completing the replacement of drain on
> the bridge deck that the centerboard pennant runs through. I have a 2000
> Rhodes 22.
>
> It took a little bit of experimentation but I found a 1 1/4" ID hose fits
> the upper part of the drain and a 3/4" hose fits on the bottom. I got a 1
> 1/4" to 3/4" adapter to join the two. Add some hose clamps, remember to
> thread the CB pennant through it all before installing, and then it's just
> getting the lengths right so it can all go together but still be long
> enough to be clamped. Attached is a couple pics of the finished product
> along with the monstrosity I removed. What you don't see in the "before"
> shot is the completely rusted hose clamps that I had to use a Dremel to
> remove. The slit in the old hose is also from the removal process.
>
> Mark
> --
> Boston, MA
>
> 2000 R22 *Luna Mia*
> 1987 Nimble 30 *For Sale*
> 1982 Com-Pac 16 *For Sale*
>
> On Mon, Jun 15, 2020 at 8:10 PM Mark Whipple <mark at whipplefamily.com>
> wrote:
>
> > Hi All,
> >
> > If this is in the archives somewhere let me know. I've done a little
> > searching on Nabble and didn't find what I needed. I need to replace the
> > hose that connects the drain the CB/diamondboard pennant runs through.
> >
> > It looks like the OD of the lower section (closer to the CB) is 7/8" OD.
> > The top section where the pennant exits is about 1" ID, so I'm guessing
> > it's about 1 1/4" OD. Total possible length looks to be about 10". The
> > difference in diameters partially explains the abomination that I
> removed.
> > Someone tried to mate two different hoses with clamps and lots of
> silicone.
> >
> > What has worked well for you in replacing this drain hose? I am wondering
> > if I can get a hose that will fit the upper part of the drain, and then
> use
> > a modified section of that same hose to bring the bottom fitting closer
> to
> > 1 1/4". Then I'd put the larger hose over the smaller one, clamping the
> > smaller section low and then the larger, overlapping hose as well.
> >
> > Thanks
> > Mark Whipple
> > Boston, MA
> >
> > 2000 R22 Luna Mia
> > 1987 Nimble 30 (for sale)
> > 1982 ComPac 16 (for sale)
> >
> >
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20200812_182047.jpg
> Type: image/jpeg
> Size: 109027 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200813/110893e8/attachment.jpg
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20200812_182100.jpg
> Type: image/jpeg
> Size: 267020 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200813/110893e8/attachment-0001.jpg
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20200813_082227.jpg
> Type: image/jpeg
> Size: 285444 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200813/110893e8/attachment-0002.jpg
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: 20200813_082201.jpg
> Type: image/jpeg
> Size: 288970 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200813/110893e8/attachment-0003.jpg
> >
>