[Rhodes22-list] Furler tensioner updated

ROGER PIHLAJA roger_pihlaja at msn.com
Mon May 25 09:57:21 EDT 2020


Michael,

I’ll be interested in what you come up with.  The way I solved this problem was to route the furling control line thru a series of fairleads mounted low on the inside of each lifeline stanchion.  Routing the furling control line thru several fairleads adds enough distributed friction along the path to damp out the control line’s momentum and prevent control line overrides on the furling drum.  It’s a completely passive system, uses off the shelf pieces/parts, and is relatively cheap.  I haven’t had a furling drum override since I installed my solution in 1988.

Roger Pihlaja
S/V Dynamic Equilibrium

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

From: Peter Nyberg<mailto:peter at sunnybeeches.com>
Sent: Sunday, May 24, 2020 9:20 PM
To: The Rhodes 22 Email List<mailto:rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Furler tensioner updated

Mike,

This is simply brilliant. I’ve long thought that there should be something like this, but I’ve looked and found nothing.  Apparently, you did too.

Let us know when thins is available for purchase.

Peter Nyberg
Coventry, CT
s/v Silverheels (1988/2016)

> On May 24, 2020, at 8:01 PM, Mike Riter <mike at traildesign.com> wrote:
>
> I've been working with a friend of mine (CoolCNCStuff.com) to make a
> tensioner for the Genoa furler on my Rhodes. We've been through a few
> different prototypes, but finally have something that works the way I hoped
> it would. The idea was to make a SIMPLE device that would hold tension on
> the line so I don't have to worry about it when deploying the genoa. This
> will make single handing much easier and end the potential rats nest snarl
> that happens when the line drops below the furler because I can't remember
> to hang onto it when running out the genoa.
>
> Here are a couple photos, one shows the tensioner and the other shows how
> nice the line coils on the furler while using the tensioner. If anyone's
> interested in seeing it in action here is a link to 2 youtube videos I made
> while deploying then furling the genoa.
> https://youtu.be/wwsH9xFgWYU
> https://youtu.be/NQTuE34GOKE
>
> Michael Riter
> SV Emma B
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_0485.JPG
> Type: image/jpeg
> Size: 2509799 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200524/931a244e/attachment.jpe>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_0484.JPG
> Type: image/jpeg
> Size: 3517411 bytes
> Desc: not available
> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200524/931a244e/attachment-0001.jpe>



More information about the Rhodes22-list mailing list