[Rhodes22-list] Help with motor mount

[Cary Tolbert]

Thanks Jesse. My track is a little different. With all of the help and
photos from the list members I think I can make a part that should  work
for my set up.
Thanks for your help.
Cary

On Tue, Nov 17, 2020, 7:59 PM Jesse Shumaker <jesse.laten.shumaker at gmail.com>
wrote:

> Mitch, nice detailed photos and measurements.
>
> Cary, I attached PDF with some measurements from my 1989 R22 (refurbished
> in 2013).  I'll be down at the boat tomorrow night and can get more
> measurements if needed.
>
> Jesse Shumaker
> S/V Zephyr
>
>
> On Tue, Nov 17, 2020 at 4:42 PM Mitch Mitchell <mitchpadl at gmail.com>
> wrote:
>
> > Hopefully these photos with dimensions will post.  Let me know what other
> > info you need.
> >
> >
> >
> >
> >
> > *Captain Mitch Mitchell*
> >
> >
> > * ACA Open Water Instructor Trainer ACA Level 2 SUP Instructor Trainer*
> > *http://coastalkayak.com* <http://coastalkayak.com>
> > *Mailto:Mitch at CoastalKayak.com* <Mitch at CoastalKayak.com>
> > * 302-539-7999*
> >
> > On Tue, Nov 17, 2020 at 11:34 AM Ric Stott <ric at stottarchitecture.com>
> > wrote:
> >
> > > HI Mitch
> > > Wow -that’s a whole different thing.
> > > It looks like hybrid between Carys and mine.
> > > It looks like 1/4 stock over the 1/8” u channel, or ???
> > > Can you define the assembly for me?
> > >
> > >
> > > Richard Stott, AIA, LEED AP
> > > www.stottarchitecture.com
> > > Office  631-283-1777
> > > Cell            516-965-3164
> > >
> > >
> > >
> > >
> > >
> > > > On Nov 17, 2020, at 10:04 AM, Mitch Mitchell <mitchpadl at gmail.com>
> > > wrote:
> > > >
> > > > Here is a photo of my 1990. Pretty sure it’s original. If it’s the
> same
> > > as yours I could get you dimension.
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: image0.jpeg
> > > > Type: image/jpeg
> > > > Size: 89341 bytes
> > > > Desc: not available
> > > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/b043f770/attachment.jpeg
> > > >
> > > > -------------- next part --------------
> > > >
> > > >
> > > > Mitch
> > > >
> > > >> On Nov 14, 2020, at 10:16 AM, Cary Tolbert <retiredtoby at gmail.com>
> > > wrote:
> > > >>
> > > >> I am asking for help with photos for an 86 Rhodes.  My boat was
> > > >> apparently hit
> > > >> in the marina and I have a damaged motor mount. I was able to
> salvage
> > > most
> > > >> of the damaged parts and replicate them from existing patterns of
> the
> > > old
> > > >> parts.
> > > >> However, the LOWER STOPS were missing. So at this point I have no
> idea
> > > what
> > > >> I need to do to replicate these parts. Photos will be very helpful.
> > > >> Measurement would also be greatly appreciated. I am guessing any
> boat
> > > from
> > > >> an 82 to an 89 may have a very similar set up.  Ric I am glad you
> can
> > > now
> > > >> send pictures with your computer. You mentioned that we have the
> same
> > > set
> > > >> up. What type of material did Stan use for the stops?  Stan said, he
> > no
> > > >> longer makes this type of mount and cannot furnish parts. So I must
> > > rely on
> > > >> your help and my modest skills to be able to sail next season.
> > > >> It must have been a lot of force on the collision as I found three
> > 1/4
> > > >> inch stainless steel bolts bent to 90 degrees and one bolt was
> sheared
> > > into
> > > >> two pieces.
> > > >>
> > > >> Thanks for your help,
> > > >> Cary Tolbert
> > > >> S/V Whisper "86
> > > >> Radford, VA
> > >
> > >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: motor_lift3.jpg
> > Type: image/jpeg
> > Size: 238505 bytes
> > Desc: not available
> > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/c7e2ec1e/attachment.jpg
> > >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: motor_lift1.jpg
> > Type: image/jpeg
> > Size: 421618 bytes
> > Desc: not available
> > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/c7e2ec1e/attachment-0001.jpg
> > >
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: Motor_lift2.jpg
> > Type: image/jpeg
> > Size: 247393 bytes
> > Desc: not available
> > URL: <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/c7e2ec1e/attachment-0002.jpg
> > >
> >
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: MotorMountMeasurements.pdf
> Type: application/pdf
> Size: 335049 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20201117/b394c419/attachment.pdf
> >
>