[Rhodes22-list] Unbolted track

Tue Jul 27 11:25:37 EDT 2021

I typically use 1/4" thick 316 stainless steel sheets. The size varies depending on the load from 1" x 2" strips for small hardware to 12" x 12" sheet stock ($130 at McMaster) for the mast crane cleat. One easily found source is McMaster Carr (https://www.mcmaster.com/metals/stainless-steel/shape~sheet-and-bar/corrosion-resistant-316-stainless-steel-6/thickness~1-4/). An image of the link is attached at the end of the email.
Mike
s/v Wind Lass ('91)
Nissequogue River, NYI'd rather be sailing ⛵Please consider the environment before printing this email.
-------- Original message --------From: Jesse Shumaker <jesse.laten.shumaker at gmail.com> Date: 7/26/21  11:28 AM  (GMT-05:00) To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> Subject: Re: [Rhodes22-list] Unbolted track Just curious for those that have added backing plates in certain scenarios,what material have you used for this?I've used steel sheet metal from Home Depot that I cut to size with anangle grinder and painted with Rustoleum primer and paint beforeinstallation.  I didn't find stainless steel sheet metal at the hardwarestore or home improvement stores.  I don't recall the gauge/thickness thatI used.  I also used fender washers on top of the backing plates.  I'veadded backing plates for the bow cleat, two chocks that I installed towardsthe bow, a flip up midship cleat that I installed, as well as the throughbolts for the anchor roller mount... so far so good.Jesse ShumakerS/V ZephyrOn Mon, Jul 26, 2021 at 9:48 AM Michael D. Weisner <mweisner at ebsmed.com>wrote:> I agree with Stan.>> The track was designed to support the stresses of the jib car. The forces> experienced in such use are directed more fore and aft, for which the track> is secured properly. A track mounted cleat, whether for spring line or> docking, exerts significant forces upward and side to side, for which the> track is not well suited. Such applications will likely result in damage to> the track, as you have found. Lastly, the track may fail if significant> force is applied, simply due to its age, which is not a necessarily a> design flaw.>> By the way, I use the foredeck mounted docking cleat as part of my mast> crane system. I have through bolted and spread the transmitted forces using> a backing plate to accommodate the nearly 500 lbs of vertical force that is> applied by the winch at the start and end of the mast erection process.> This is quite different than the original purpose of the deck mounted> docking cleat which was designed to sustain mostly lateral (horizontal)> forces when docked or moored.>> Please do not assume that any fixture will withstand forces outside of its> design parameters and remember to account for changes due to age of the> device and boat.>> Mike> s/v Wind Lass ('91)> Nissequogue River, NY>> -----Original Message-----> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of> THOMAS POLISE via Rhodes22-list> Sent: Monday, July 26, 2021 10:28 AM> To: Lewin <lewin at mail.com>> Cc: stan <stan at generalboats.com>; The Rhodes 22 Email List <> rhodes22-list at rhodes22.org>> Subject: Re: [Rhodes22-list] Unbolted track>> It was being used as a spring line when it broke track>> > On Jul 26, 2021, at 9:50 AM, Lewin <lewin at mail.com> wrote:> >> > If a track mounted cleat were only used for bow and stern spring lines> would it be less likely to fail?> >> > ------------------> > Bernard> >> >> > On Jul 25, 2021, at 9:27 PM, THOMAS POLISE via Rhodes22-list <> rhodes22-list at rhodes22.org> wrote:> >> > I only posted because there were previous posts about mounting cleats> on the track. I have no complaints about the boat and enjoy everything> about it.  I know now, the hard way, not to mount cleats on the tracks and> wanted to make others aware. I will repair and continue on enjoying> everything about the boat. No disrespect was intended, Stan, and I will> continue to appreciate everything you did to create this incredible boat.> >> >> On Jul 25, 2021, at 6:47 PM, stan <stan at generalboats.com> wrote:> >>> >> > >> My O my, I am flattered when those Rhodies who praise the Rhodes> engineering get pleasure out of finding what they think is a flaw.> >>> >> In the Rhodes 50 plus years, I have not heard of a single genoa track> pull off - when used for what it was designed to do; carry the load of the> giant 175 genoa sheets. That load is carried by a great number of machine> screws; more than sufficient to carry the shear loading placed on them.  Of> course Todd did not mean they should be bolted on to the gel coat.  But I> think his comment that "I've found more than a few questionable things> which needed to be properly "re"engineered." is gratuitously disingenuous.> Personally my over the hill engineering mind would think it silly to mount> docking cleats to genoa tracks. Even if those tracks had long enough> machine screw passing all the way through the outerside of the hull and had> fender washers and lock nuts on them, those shiftable docking cleats would> distort the thin edges of the genoa tracks making the genoa cars a chore or> even impossible to adjust.> >> If you want to put on docking cleats, mount them to the boat proper.> You want a spring line cleat, don't use it for a docking cleat.  You want a> boat engineered for docking? Have I got a boat to sell you. No hands, no> straps, just three little docking eyes. See attachment. Guaranteed to hold> for any winds. Just stop putting moving docking cleats where they are not> invited to go.> >>> >> stan> >>> >>> >>>> On 7/25/21 12:00 PM, THOMAS POLISE via Rhodes22-list wrote:> >>> I found that there are no nuts or nut plates, just curious if anyone> else had a similar situation.> >>>> >>>>> On Jul 25, 2021, at 11:47 AM, Todd Tavares <tavares0947 at gmail.com>> wrote:> >>>>>> >>>>> Those are machine screws. There should be nuts underneath or nut> >>>>> plates embedded in the rail under the gelcoat.> >>>>>> >>>>> But it wouldn't surprise me if the machine screws were just> >>>>> threaded into wood or even threaded into epoxy. I've found more> >>>>> than a few questionable things which needed to be properly> "re"engineered.> >>>>> Let us know what you find once you dig into this problem.> >>>>>> >>>>> Todd T.> >>>>>> >>>>>> On Sun, Jul 25, 2021, 11:10 AM Rick Lange <sloopblueheron at gmail.com>> wrote:> >>>>>>> >>>>>> Hi Thomas,> >>>>>>> >>>>>> Would you prefer gelcoat damage?> >>>>>>> >>>>>> Never mount a dockline holding cleat without a backing plate.> >>>>>>> >>>>>> Regards,> >>>>>>> >>>>>> Rick Lange> >>>>>>> >>>>>>> >>>>>> On Sun, Jul 25, 2021 at 11:02 AM THOMAS POLISE via Rhodes22-list> >>>>>> < rhodes22-list at rhodes22.org> wrote:> >>>>>>> >>>>>> Anyone else notice that the jib track is just put in without> >>>>>> bolts.  I added cleat to track which was yanked out in high winds.> >>>>>>> >>>>>> -------------- next part -------------- A non-text attachment was> >>>>>> scrubbed...> >>>>>> Name: IMG_0041.jpg> >>>>>> Type: image/jpeg> >>>>>> Size: 763976 bytes> >>>>>> Desc: not available> >>>>>> URL: <> >>>>>>> >>>>> http://rhodes22.org/pipermail/rhodes22-list/attachments/20210725/c> >>>>> 07b3fde/attachment.jpg> >>> .> >>> >> <6221802_20170501145922633_1_XLARGE 3.jpg>> >>>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot_20210727-111606_Chrome.jpg
Type: image/jpeg
Size: 339078 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20210727/ad515376/attachment.jpg>