[Rhodes22-list] Rudder repair

[THOMAS POLISE]

Thanks 

> On Jun 24, 2021, at 10:13 PM, Michael D. Weisner <mweisner at ebsmed.com> wrote:
> 
> Thomas,
> 
> Take a look at these recent emails. I think that the exact issue was
> addressed:
> http://www.rhodes22.org/pipermail/rhodes22-list/2021-June/088432.html
> 
> especially the later post by Graham Stewart:
> http://www.rhodes22.org/pipermail/rhodes22-list/2021-June/088435.html
> "Those are just very short flathead machine screws. There should be one on
> each side. The head goes in from the inside and the locknut is what shows on
> the outside. Just get a stainless steel flat head machine screw that fits
> the hole diameter, insert it from the inside. Fasten the locknut and cut off
> the extra. "
> 
> Mike
> s/v Windlass ('91)
> Nissequogue River, NY
> 
> -----Original Message-----
> From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of THOMAS
> POLISE via Rhodes22-list
> Sent: Thursday, June 24, 2021 9:13 PM
> To: rhodes22-list at rhodes22.org
> Subject: [Rhodes22-list] Rudder repair
> 
> I used the old bracket as a template and realized that the inside bolt on
> Lower bracket blocked rudder from lowering.  I was wondering if others had
> the same condition. 
> 
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: IMG_4998.jpg
> Type: image/jpeg
> Size: 2463822 bytes
> Desc: not available
> URL:
> <http://rhodes22.org/pipermail/rhodes22-list/attachments/20210624/0c27c7ce/a
> ttachment.jpg>
>