[Rhodes22-list] Line sizes

[Larry Gioia]

Thanks Graham! 

Larry

> On Mar 19, 2021, at 10:22 PM, Graham Stewart <gstewart8 at cogeco.ca> wrote:
> 
> Dave:
> The following URL takes you to the SailBoat Owners web site where there is a calculator that will guide you in the choice of line for the R22. That might be of help.
> https://shop.sailboatowners.com/cu/detail-rrc.php?a=1&brand=RHODES 
> 
> Graham Stewart
> Agile, Rodes 22, 1976
> Kingston Ontario
> 
> 
> 
> 
> 
> -----Original Message-----
> From: Rhodes22-list [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Larry Gioia via Rhodes22-list
> Sent: Friday, March 19, 2021 9:28 PM
> To: The Rhodes 22 Email List
> Subject: Re: [Rhodes22-list] Line sizes
> 
> Hi,    I'm replacing a few of the lines on the '86 Rhodes I bought last year.  I found some lengths in the archives but not the widths of the lines. I'm not sure that the lines on it were the right size.  Any edits to the following guesses?       Lines to be replaced:  Inner-Mast Furling sheet - 1/4" x 20'  Jib furling sheet - 1/4" x 25'   Topping lift line 3/16" x 60'        Lines I have replaced, sizes I used: Afterstay tightening line:1/4"  x 15'        Mainsail outhaul line: 5/16" x 20'     Mainsheet: 3/8" x 35'   Rudder lift line: 1/4" x 10' (I think)      Lines I won't be replacing this year, but sizes they appear to be:  Jib sheet: 3/8" x 60'       Centerboard line: 5/16" x 15'    Thanks for any edits, or lists you can point me to!    Larry
>    On Thursday, March 18, 2021, 05:09:05 PM EDT, David Bradley <dwbrad at gmail.com> wrote:  
> 
> I replaced my IMF main last year and one thing Stan had mentioned to take particular care of was to attach the bottom of the luff in the existing hole in the furling tube to line up with the boom, and then stretch the luff to its fullest length at the top. I wanted to use the existing hole at the top of the furling tube as well so had to pull harder than I would have guessed.
> 
> Dave Bradley
> s/v Sea Cloud
> Old Greenwich, CT
> 
>> On Mar 18, 2021, at 4:54 PM, Joe Dempsey <joedempsey at hughes.net> wrote:
>> 
>> George, As promised here are some photos that may help you in removing your
>> main from the IMF mast <http://mast.th/>
>> 
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/2.png> 
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/3.jpg>
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/4.jpg>
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/5.jpg>
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/6.jpg>
>> <http://rhodes-22.1065344.n5.nabble.com/file/t752/7.jpg>
>> 
>> When removing furling sheet, be sure to remember the orientation for
>> replacing it so it winds in the right direction.  Hope this helps.
>> 
>> 
>> 
>> -----
>> Joe Dempsey
>> s/v Respite 
>> Rhodes 22 1989/2005
>> Deltaville,VA
>> --
>> Sent from: http://rhodes-22.1065344.n5.nabble.com/
> 
> 
>