[Rhodes22-list] Gooseneck Failure

[Chris Geankoplis]

Thanks Jeff,
He will need those parts too. The plastic face piece maybe 3” by 7” by 5/8
with a slot in it and the doughnut that the tube rotates in
Will need replacing too. When he is done it will be a very robust
gooseneck. Thanks again.
Chris G
On Sat, Apr 30, 2022 at 1:33 PM Jeff Smith Photo <jeffsmithphoto at gmail.com>
wrote:

> The always helpful Peter Nyberg has an excellent either video or post about
> ordering beefed up gooseneck parts from Dwyer Masts. I installed them last
> Fall and what a difference. Here is my order:
> DH 3143  - U-Bracket
> 2 Ordered @     $7.42/ea
> Item Total - $14.84
>
> CR1      - Rigging ring, 3/4"
> 2 Ordered @     $0.50/ea
> Item Total - $1.00
>
> CLP-4-0.984      - Clevis Pin
> 2 Ordered @     $2.72/ea
> Item Total - $5.44
>
> DH 334   - Heavy Duty Universal
> 1 Ordered @     $14.42/ea
> Item Total - $14.42
> The clevis pins were mislabeled in their catalog and proved to be 1/8"
> short.  Dwyer promptly sent the correct length.
>
> Best Regards
> Jeff Smith
> www.http://JeffSmithPhoto.Net
> 732-236-1368
>