[Rhodes22-list] In-hull transducer?

[Bob Garrant]

Thanks for the suggestion about the access port Ric seems like a good idea.
Bob

On Mon, Jul 25, 2022 at 2:52 PM Ric Stott <ric at stottarchitecture.com> wrote:

> My depth gage transducer is located toward the stern just to port of
> center and right behind the Lazerette gunwale.
> My speed Transducer is 10” to port  and in line with the head.
> I installed a 4” plastic access port right over the transducer in the sole
> of the compartment under the hinged panel next to and forward of the
> compression post.
> Ric
> Dadveenture
>
> Richard F. Stott, AIA, LEED AP
> ric at stottarchitecture.com
> O -631-283-1777
> C- 516-965-3164
>
>
>
> > On Jul 25, 2022, at 2:30 PM, DAVID BERG via Rhodes22-list <
> rhodes22-list at rhodes22.org> wrote:
> >
> > Bob,
> >
> > My are located just starboard of the companionway step in front of the
> icebox.
> >
> > David Berg
> > Blue Loon
> > Minneapolis, MN
> >
> > -----Original Message-----
> > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of
> Bob Garrant
> > Sent: Monday, July 25, 2022 1:24 PM
> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> > Subject: [Rhodes22-list] In-hull transducer?
> >
> > Hi folks,
> > I am installing an in-hull transducer.
> > I’m trying to figure out where to locate it. Thinking about placing it
> below the cabin floor just offset from the centerboard sleeve.
> > Wondering if anyone in the group has installed an in-hill transducer and
> how it was done.
> > Thanks very much
> > Bob Garrant
> > Sail la Vie
> > Kent Island, MD
> >
>
>