[Rhodes22-list] Forward bulkhead and hull

[Patrick Cheung]

Thanks a lot Peter. I am going to leave it alone. But I will beef up the longitudinal .

Patrick


> On Jun 17, 2022, at 4:09 PM, Peter Nyberg <peter at sunnybeeches.com> wrote:
> 
> Patrick,
> 
> The view under my settee is similar to what you show in your picture.  There's a gap between the bulkhead and the hull, and no visible means of attachment.  Looking at the back side (the side closer to the bow), I find fiberglass tabbing attachment near the top edge both port and starboard.  
> 
> Unfortunately, I've got something installed in this space that prevents me from seeing if there's additional attachment points further down.
> 
> HTH,
> 
> --Peter
> 
>> On 2022-06-15, at 16:58:57 EDT, Patrick Cheung wrote:
>> 
>> Dear Rhodies,
>> I am wondering, in the original built, is the forward bulkhead ever attached to 
>> the hull, using Fiberglass tab. There’s a half inch gap between the bulkhead and 
>> hull. 
>> Can you kindly peek under the bench seat, and see if and how your bulkhead is 
>> attached to the hull. 
>> This picture is taken with the boat in the water.
>> 
>> Thank you in advance,
>> Patrick
>> 
>> 
>> <a 
>> href="http://rhodes22.org/pipermail/rhodes22-list/attachments/20220615/1036caaf/attachment.jpeg" 
>> target="_blank">image0.jpeg</a> 
>> -------------- next part --------------
>> 
>> 
>> 
>