[Rhodes22-list] Spreader bolt / washer - pop top slider pin

[DAVID BERG]

Rick,

 

I’ve seen that answer here before, but it doesn’t seem correct! Perhaps. Does the IMF have to come out to replace them?

 

Dave

 

From: Rick Lange <sloopblueheron at gmail.com> 
Sent: Wednesday, May 18, 2022 1:50 PM
To: DAVID BERG <davidmberg at mac.com>; The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Spreader bolt / washer - pop top slider pin

 

Hi David,

 

Your washers are "tapered" because they have been deformed.  Any hardware store has nylon replacements.




Regards,

Rick Lange

 

 

On Wed, May 18, 2022 at 2:46 PM DAVID BERG via Rhodes22-list <rhodes22-list at rhodes22.org <mailto:rhodes22-list at rhodes22.org> > wrote:

Good afternoon,

I need to replace the tapered washers and possibly the bolts for my spreaders. I only inspected briefly, and in the rain, but it appears that the IMF must be removed to do this work. I'm assuming these are Dwyer parts. 

I also need a new spring detent pin, or whatever you call the thing that releases the pop top carriage (or the boom carriage for that matter).

Any advice would be greatly appreciated.

David Berg
Blue Loon
Minneapolis


-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.jpeg
Type: image/jpeg
Size: 58230 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/998f9621/attachment.jpeg>