[Rhodes22-list] Spreader bolt / washer - pop top slider pin

[Bill]

can someone remove me from this website

On Thu, May 19, 2022 at 7:33 AM Patrick Cheung <chitakcheung at gmail.com>
wrote:

> Chris, is that a radar reflector?
>
> Patrick
>
>
> > On May 18, 2022, at 11:20 PM, Chris Geankoplis <
> chrisgeankoplis at gmail.com> wrote:
> >
> > Good idea to replace the bolt and unlock nut. You do not need to remove
> the
> > IMF tube to do this. Use all new bolts and nut.  I reused the old nylock
> > nut and lost the spreader in a squall, damn near lost the mast. Alice was
> > not so happy. I had to use a boat hook to re tension the port shroud and
> > limp into the marina in Elba, see picture.
> >
> > The shims you can make if you can’t get them from Stan.
> >
> >> On Wed, May 18, 2022 at 1:45 PM DAVID BERG via Rhodes22-list <
> >> rhodes22-list at rhodes22.org> wrote:
> >>
> >> Good afternoon,
> >>
> >> I need to replace the tapered washers and possibly the bolts for my
> >> spreaders. I only inspected briefly, and in the rain, but it appears
> that
> >> the IMF must be removed to do this work. I'm assuming these are Dwyer
> >> parts.
> >>
> >> I also need a new spring detent pin, or whatever you call the thing that
> >> releases the pop top carriage (or the boom carriage for that matter).
> >>
> >> Any advice would be greatly appreciated.
> >>
> >> David Berg
> >> Blue Loon
> >> Minneapolis
> >>
> >>
> >> -------------- next part --------------
> >> A non-text attachment was scrubbed...
> >> Name: image2.jpeg
> >> Type: image/jpeg
> >> Size: 58230 bytes
> >> Desc: not available
> >> URL: <
> >>
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/998f9621/attachment.jpeg
> >>>
> >>
> > -------------- next part --------------
> > A non-text attachment was scrubbed...
> > Name: image_6483441.JPG
> > Type: image/jpeg
> > Size: 597188 bytes
> > Desc: not available
> > URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/1452aa10/attachment.jpe
> >
>