[Rhodes22-list] Pop top slider attachment bracket (pop top side)

[DAVID BERG]

Rhodies,

 

Does anyone have a good idea for fabricating a new bracket that holds the
pop top (pop top side)? I recently broke mine as I forgot to release it
before lowering the mast. I thought I could just use DAP epoxy and clamp it
overnight, but that did not hold at all. The material appears to be HDPE and
is very brittle.

 

I can probably purchase a chuck of HDPE and cut/drill a new bracket, but am
wondering if anyone has a better idea for material or method? Photo
attached. Note that the photo also shows the chamfered holes for the mast
step tabernacle that I recently repaired. I used the method recommended by
West Systems reported in a previous thread. This ended up working great, as
far as I can tell. 

 

Thanks,

David Berg

Blue Loon, Rhodes 22 1996/2003 

Minneapolis, MN

 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: Pop top bracket.jpg
Type: image/jpeg
Size: 140658 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20230905/f4c18f12/attachment.jpg>