[Rhodes22-list] Pop top enclosure question

[peter beckerman]

 Thanks Roger,   My windows already have Velcro all the way around.
Peter 


    On Thursday, August 1, 2024 at 10:38:01 AM EDT, ROGER PIHLAJA <roger_pihlaja at msn.com> wrote:  
 
 Hi Peter,

If you are going to have a boat canvas shop install privacy screens on your pop top enclosure; then, you should also have them install Velcro strips on the outside vinyl windows.  The vinyl windows overlap the sides of the pop top enclosure.  The overlap functions as a sort of storm flap.  However, if you get a strong wind driven rain from the bow or the stern, the vinyl windows will lift up.  You will get a pretty big leak around the windows.  Since the port side window is right above my berth, this leak was a pretty big deal!  A few strips of Velcro on the edge of the windows will stop the leaks.  The Velcro will also stop wind driven flapping and make the pop top enclosure quieter.

Roger Pihlaja
S/V Dynamic Equilibrium
1978. Sanford, MI
Sent from my iPhone

> On Aug 1, 2024, at 1:23 AM, ROGER PIHLAJA <roger_pihlaja at msn.com> wrote:
>
> Hi Peter,
>
> On my pop top enclosure, there are privacy screens on the inside that roll down like the clear vinyl windows on the outside.  Those straps you are asking about are for securing the privacy screens in the up position.  I think the privacy screens were an extra cost option at one point and your pop top does not have them.  A good boat canvas shop should be able to make you a set and install them on your pop top.  We find them very useful, especially when staying overnight in a crowded marina.
>
> Roger Pihlaja
> S/V Dynamic Equilibrium
> 1978. Sanford, MI
>
> Sent from my iPhone
>
>> On Jul 31, 2024, at 10:13 PM, peter beckerman via Rhodes22-list <rhodes22-list at rhodes22.org> wrote:
>>
>> 
>> Hi All  On my pop top enclosure there are six plastic strips with button fasteners on the ends.  They hang down from the inside ceiling with two by each window and two more in front of the door.  With the door unzipped and rolled up the two strips loop around the door and snap into matching buttons on the top of the enclosure on the companion way hatch.  This keeps the door nicely out of the way, and is how I think these strips were designed to be used.  But what of strips by the windows?  What are they intended for?  At first glance I assumed they were to be used, like the door, to hold the windows open to allow the breeze into the cabin, but they are on the inside and the screens are sewn shut.  So what purpose do they serve?    Does anyone have this same configuration on their pop top enclosure?  What do you do with there strips?
>> Thanks,Peter
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: door rolled-up pop top.jpg
>> Type: image/jpeg
>> Size: 150361 bytes
>> Desc: not available
>> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240801/b3489634/attachment.jpg>
>> -------------- next part --------------
>> A non-text attachment was scrubbed...
>> Name: interior window pop top.jpg
>> Type: image/jpeg
>> Size: 281065 bytes
>> Desc: not available
>> URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240801/b3489634/attachment-0001.jpg>