[Rhodes22-list] Sheet Dimensions and Specs

Tue Jul 2 14:45:37 EDT 2024

Ken,
Ric posted some spreader length above.  My IMF spreader tubes are 35 1/2
just the aluminum part.  Just slightly shorter than his measurements.  All
in the ball park of 35-1/2 to 35-7/8.  Attached photo shows the spreader
tip and the Dwyer part attached to Mast.
Patrick

On Tue, Jul 2, 2024 at 12:06 PM Kenwood _ <kenwood364 at gmail.com> wrote:

> Sorry for the delay there, looks like the email list blocks a lot of my
> images. I'll try linking them if i want to post more than one.
>
> Rodger, yes. We machined new sockets and pins for the traveler to install
> into. Piece of cake
>
> Peter, thanks for that height dimension!
>
> Rodger again thank you! I'll look into the harken set, for the moment i was
> able to find a set that will work for now.
> <https://nextcloud.kitsunehosting.net/index.php/s/NJPrZBJWHatXgyM>
>
> Rodger again, its a pretty big machine! We do a lot of machining and
> fabricating. Heres a few videos of us working on new blocks for the mast.
> <https://nextcloud.kitsunehosting.net/index.php/s/zoFgg33qFMdZm7t>
>
> If anyone could measure precisely their spreader length, that would be
> super appreciated! Its hard to guess and pick without lifting and rasing
> the mast, and i still have no idea how that is done.
>
> Thank you all so much for all your advice! More progress soon to come, the
> first wet-test is ticking down :)
>
> On Thu, Jun 27, 2024 at 7:44 AM ROGER PIHLAJA <roger_pihlaja at msn.com>
> wrote:
>
> > So, how big is this CNC machine?  Maximum dimensions of parts that can be
> > produced?  hp?  What materials can you work with?  Do you also have the
> > tool crib full of cutters, or would we have to supply you with both the
> > material and the cutting tools?  When purchasing the cutting tools, what
> > taper does your chuck require?  What programming language?  Do you prefer
> > your mechanical drawings with dimensions all referenced to a common
> datum?
> >
> > Welcome aboard!  I'm perfectly willing to work with you.
> >
> > Roger Pihlaja
> > S/V Dynamic Equilibrium
> > 1978  Sanford, MI
> > ________________________________
> > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf of
> > Graham Stewart <gstewart.gm at gmail.com>
> > Sent: Sunday, June 23, 2024 10:22 AM
> > To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
> > Subject: Re: [Rhodes22-list] Sheet Dimensions and Specs
> >
> > I, for one, would be very interested to see examples of how you use the
> CNC
> > to make boat parts.
> >
> > Graham Stewart
> >
> >
> >
> > On Sat, Jun 22, 2024 at 7:17 PM Kenwood _ <kenwood364 at gmail.com> wrote:
> >
> > > Oh I'm totally fine making parts for people! Especially if it goes both
> > > ways~ I really could use some dimensions and specifications so I know
> > > like.. what parts to make :3
> > >
> > > On Sat, Jun 22, 2024, 6:04 PM Hank <hnw555 at gmail.com> wrote:
> > >
> > > > He meant everyone might ask you to make something and there’s a bit
> of
> > > > jealousy. It’sa good thing. 🙂
> > > >
> > > > On Sat, Jun 22, 2024 at 6:00 PM Kenwood _ <kenwood364 at gmail.com>
> > wrote:
> > > >
> > > > > 😔
> > > > >
> > > > >
> > > > > On Sat, Jun 22, 2024 at 5:52 PM Frank Goldsmith <
> > > goldsmith.cf at gmail.com>
> > > > > wrote:
> > > > >
> > > > > > I think Todd was joshing with you.
> > > > > >
> > > > > > Frank
> > > > > >
> > > > > > > On Jun 22, 2024, at 5:34 PM, Kenwood _ <kenwood364 at gmail.com>
> > > wrote:
> > > > > > >
> > > > > > > Why? I don't understand sorry. I'm just trying to be polite and
> > > > engage
> > > > > > with
> > > > > > > other rhodes owners :c this is my first big boat project and I
> > > don't
> > > > > > wanna
> > > > > > > step on toes or do something dangerous
> > > > > > >
> > > > > > > On Fri, Jun 21, 2024 at 8:23 AM Todd Tavares <
> > > tavares0947 at gmail.com>
> > > > > > wrote:
> > > > > > >
> > > > > > >> Kenwood,
> > > > > > >>
> > > > > > >> You know you screwed up right?
> > > > > > >>
> > > > > > >> You shouldn't have let it us know you have a CNC.  🤔
> > > > > > >>
> > > > > > >>
> > > > > > >> Todd T.
> > > > > > >>
> > > > > > >> On Thu, Jun 20, 2024, 10:47 AM Kenwood _ <
> kenwood364 at gmail.com>
> > > > > wrote:
> > > > > > >>
> > > > > > >>> Hello all. Just wanted to say, its so sad to hear about stans
> > > > > passing.
> > > > > > >> I've
> > > > > > >>> obviously never met him, but its clear how much of a core
> > > > centerpiece
> > > > > > he
> > > > > > >>> was. He's mentioned in every piece of literature and
> > > documentation
> > > > > all
> > > > > > >> over
> > > > > > >>> the internet.
> > > > > > >>>
> > > > > > >>> Im in the process of machining several new parts for my boat,
> > > > mostly
> > > > > > mast
> > > > > > >>> fittings, broken parts, etc. But im mostly just copying what
> > > > pieces i
> > > > > > >> have.
> > > > > > >>> My boat didn't come with sheets (for the jib or the main) and
> > it
> > > > > didn't
> > > > > > >>> come with a traveler. I was wondering.. if anyone had
> > > > > dimensions/specs
> > > > > > >> for
> > > > > > >>> these pieces? Or perhaps know of an equivalent locking main
> > > sheet?
> > > > > Ive
> > > > > > >>> already purchased and begun assembling a new traveler. Its
> > going
> > > to
> > > > > be
> > > > > > a
> > > > > > >>> roller type with a set of blocks either end. But ive also
> seen
> > > the
> > > > > > >> locking
> > > > > > >>> pin style.
> > > > > > >>>
> > > > > > >>> Thanks so much.
> > > > > > >>>
> > > > > > >>> [image: PXL_20240617_174724313.jpg]
> > > > > > >>> [image: PXL_20240617_174522017.jpg]
> > > > > > >>> -------------- next part --------------
> > > > > > >>> A non-text attachment was scrubbed...
> > > > > > >>> Name: PXL_20240617_174724313.jpg
> > > > > > >>> Type: image/jpeg
> > > > > > >>> Size: 3221948 bytes
> > > > > > >>> Desc: not available
> > > > > > >>> URL: <
> > > > > > >>>
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240620%2F88062c7d%2Fattachment.jpg&data=05%7C02%7C%7Ced64dd3bcdc448ebb02908dc93900384%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638547493946146910%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=ob659ULQ5jg4A1jePJCspqSdLhGlCVL8yaOedt5E2dA%3D&reserved=0
> > <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240620/88062c7d/attachment.jpg
> > >
> > > > > > >>>>
> > > > > > >>> -------------- next part --------------
> > > > > > >>> A non-text attachment was scrubbed...
> > > > > > >>> Name: PXL_20240617_174522017.jpg
> > > > > > >>> Type: image/jpeg
> > > > > > >>> Size: 2581451 bytes
> > > > > > >>> Desc: not available
> > > > > > >>> URL: <
> > > > > > >>>
> > > > > > >>
> > > > > >
> > > > >
> > > >
> > >
> >
> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Frhodes22.org%2Fpipermail%2Frhodes22-list%2Fattachments%2F20240620%2F88062c7d%2Fattachment-0001.jpg&data=05%7C02%7C%7Ced64dd3bcdc448ebb02908dc93900384%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C638547493946156266%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%7C%7C%7C&sdata=xep0yvkP1bFUjjkCtXsIBqP%2B4qo3G%2BoxuvoLFZYpuuw%3D&reserved=0
> > <
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240620/88062c7d/attachment-0001.jpg
> > >
> > > > > > >>>>
> > > > > > >>>
> > > > > > >>
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Spreader2.jpg
Type: image/jpeg
Size: 336172 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240702/cccb0920/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Spreader1.jpg
Type: image/jpeg
Size: 296301 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20240702/cccb0920/attachment-0001.jpg>