[Rhodes22-list] Cockpit support/lifting size

[Kenwood _]

I dont think it attached correctly?

On Thu, Jul 25, 2024 at 3:27 PM PBR <pbryanriley at gmail.com> wrote:

> Here is a pic. of a general boats Mast crutch design circa  2012.  This pic
> is from before I took possession - whatever the shiny cans on top are I
> don't think those came with it.
> -Patrick
>
>
> On Thu, Jul 25, 2024 at 3:17 PM Kenwood _ <kenwood364 at gmail.com> wrote:
>
> > Having it hook onto the transom and stay upright using the railing is a
> > good idea, I like that :) Less wood too than making a freestanding truss
> > that sits on the cockpit floor, thanks! That is some good info to
> consider.
> >
> > I'll machine a big roller up on the lathe. Cool! And thanks for the
> height
> > dimension!
> >
> > On Thu, Jul 25, 2024 at 2:54 PM Ric Stott <ric at stottarchitecture.com>
> > wrote:
> >
> > > I built one out of Treated 5/4 x 4.  I used a saber saw to cut a 3”
> deep
> > > notch the bottoms so they fit over the transom.
> > > I was 6’ high off the transom.
> > > I drilled a couple of holes at Stern Rail height so I could lash it to
> > the
> > > rail.
> > > It worked ok, but it was heavy and a roller at the top makes sliding
> the
> > > mast from the bow puppet to the tabernacle kind of difficult.
> > > I got a fee home made oe from a guy in Jersey - it needs to modified
> > also,
> > > but it has a roller at the top - makes a huge difference.
> > > Easily fabricated out of 1-1/2” or 2” thick wall  aluminum tube with a
> 2”
> > > PVC pipe over a couple of rubber wheels on a 1/$’ threaded rod drilled
> > thru
> > > the top.
> > > Don’t forget cross brace reinforcement.
> > > I used 5” x “ pieces (2 each pipe) of  HDME for the notched  brackets
> > that
> > > slip over the transom.  They are thru bolted to the 2” vertical tubes
> w/
> > > 1/4” x 3-1/2” SS machine screws.
> > > Have fun
> > > Ric
> > > DAdventure
> > >
> > > Richard F. Stott, AIA, LEED AP
> > > ric at stottarchitecture.com
> > > O -631-283-1777
> > > C- 516-965-3164
> > >
> > >
> > >
> > > > On Jul 25, 2024, at 2:27 PM, Kenwood _ <kenwood364 at gmail.com> wrote:
> > > >
> > > > Hello again forum! Once again I'm looking for dimensions off your
> > > > more-complete/original boats~
> > > >
> > > > When i launched mine for the first time we laid the mast on the back
> > > > railing when fitting it into the tabernacle, this worked! as long as
> we
> > > > removed the deckhouse pop-top, because the angle with the back
> railing
> > > was
> > > > far too steep! The top had to be removed first. Which while not the
> > worst
> > > > thing, was not very convenient.
> > > >
> > > > I've heard that there exist or existed poles to lift the mast up in
> the
> > > > cockpit. Here is one such on sv airpower
> > > > [image: image.png]
> > > > Anyway, i'd like to replicate that! So i dont have to keep taking off
> > the
> > > > roof, what height is yours at? Does it need to fold? Im planning rn
> on
> > > > making a simple wooden truss structure that can also serve to
> organize
> > > the
> > > > shrouds and such.
> > > >
> > > > Appreciate your comments and input thank you!
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: image.png
> > > > Type: image/png
> > > > Size: 610985 bytes
> > > > Desc: not available
> > > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240725/1bab4666/attachment.png
> > > >
> > >
> > >
> >
>