[Rhodes22-list] Hello Everyone!

[Chris Geankoplis]

Welcome indeed!
Chris Geankoplis
XENOS

On Tue, Jun 18, 2024 at 6:30 PM Kenwood _ <kenwood364 at gmail.com> wrote:

> That's very generous Stephen, and so cool! You're not too far from me.
> Planning on doing a wet test on lake Winnipesaukee and assuming I don't
> sink I'd like to sail from Portsmouth to mystic Connecticut. I'll go right
> by you!
>
> On Tue, Jun 18, 2024, 6:15 PM Stephen Staum <snstaum at gmail.com> wrote:
>
> > Hi Kenwood. Welcome to ‘da list. I sail out of the Hingham Shipyard
> Marina
> > in Hingham, MA.  This is my 3rd Rhodes 22 (since 2003). Call me if you
> have
> > any questions or need a sailing break from just working on your boat.
> >
> > Stay Well,
> > Stephen Staum
> > Needham, MA
> > s/v Pinafore
> > (781) 704-1037
> >
> >
> > On Tue, Jun 18, 2024 at 5:34 PM Kenwood _ <kenwood364 at gmail.com> wrote:
> >
> > > I'm located in Concord NH!
> > >
> > > I'm going to be CNCing up these blocks to attach to the mast, one is
> the
> > > auto reefing bearing block (planning on using delrin for the bearing
> and
> > > aluminum for the face) and replacing the rollers inside with HDPE
> > >
> > > The lower one is I believe for the cabin top but I've never had it up!
> I
> > > had pieces of the original to compare too.
> > >
> > > Lmk if these look right before I cut and weld haha! A lot easier to
> > change
> > > plans in the design stage than afterwards
> > >
> > > Also neither of my original blocks has pins but it looks like there are
> > > holes for pins to be installed? Is that correct? Lmk! And thank you for
> > > your welcomes :)
> > >
> > > On Tue, Jun 18, 2024, 3:43 PM Graham Stewart <gstewart.gm at gmail.com>
> > > wrote:
> > >
> > > > Kenwood: Welcome! I will be interested to learn about your
> restoration
> > > > have don the same a few years back.
> > > >
> > > >
> > > > Graham Stewart
> > > > Rhodes 22
> > > > Agile, 1976
> > > >
> > > > ________________________________
> > > > From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> on behalf
> of
> > > > Kenwood _ <kenwood364 at gmail.com>
> > > > Sent: Tuesday, June 18, 2024 3:21 PM
> > > > To: rhodes22-list at rhodes22.org <rhodes22-list at rhodes22.org>
> > > > Subject: [Rhodes22-list] Hello Everyone!
> > > >
> > > > Hello! Hope my message makes it to the list. Im new here! For the
> past
> > > few
> > > > years ive been working on rebuilding/restoring a rhodes 22 with the
> > hope
> > > > that very soon i'll be able to sail it! its been a lot of fiberglass,
> > > > woodcutting and CNC machining but we're almost ready.
> > > >
> > > > Hope to hear from the group! I already have so many questions to ask!
> > > >
> > > > [image: PXL_20240604_235632192.jpg]
> > > > -------------- next part --------------
> > > > A non-text attachment was scrubbed...
> > > > Name: PXL_20240604_235632192.jpg
> > > > Type: image/jpeg
> > > > Size: 1734189 bytes
> > > > Desc: not available
> > > > URL: <
> > > >
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240618/09cf3328/attachment.jpg
> > > > >
> > > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: IMG_20240617_141508_601.jpg
> > > Type: image/jpeg
> > > Size: 271298 bytes
> > > Desc: not available
> > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240618/cefa352c/attachment.jpg
> > > >
> > > -------------- next part --------------
> > > A non-text attachment was scrubbed...
> > > Name: IMG_20240617_141508_553.jpg
> > > Type: image/jpeg
> > > Size: 342146 bytes
> > > Desc: not available
> > > URL: <
> > >
> >
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20240618/cefa352c/attachment-0001.jpg
> > > >
> > >
> >
>