[Rhodes22-list] Trailer Photos???
rhendy
rhodes22-list@rhodes22.org
Sun, 15 Sep 2002 09:06:10 -0400
This is a multi-part message in MIME format.
------=_NextPart_000_0008_01C25C97.2214C9C0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Also, to those on the other list who have given their inputs, Thank You.
I have a Triad uni-matic type trailer although my boat is a 1976. The =
bunk boards are indeed large, and they sit somewhat outboard where the =
hull has turned about 45 degrees up. They do not sit UNDER the hull =
per-se but are more angled. I have noticed that they do bend under load =
to conform to the shape of the hull there.
There is but one cross member in the keel area but it does not appear =
that there was ever a support bracket there, however, just aft of the =
cross member, there are two holes in the angled cross members ( the =
cross members which run at a 30 degree angle (or so) back to the aft =
corners). I surmise that these holes had a roller pin between them at =
one time, but they are well aft of the first cross member and well aft =
of where I would logically place the weight of the boat. For now, I =
have a 4X4 wooden block attached to the first cross member and it seems =
to do an adequate job.
But you can see why I am curious what it SHOULD look like so I can get =
mine right.
Fair Winds,
Bob Hendrickson
S/V Getaway
----- Original Message -----=20
From: rhendy=20
To: Rhodes List=20
Sent: Sunday, September 15, 2002 8:42 AM
Subject: [Rhodes22-list] Trailer Photos???
All,
I am making the request, again. Does anyone have a photo of the =
area of their trailer which supports the keel? I am trying to re-create =
this area on my trailer. All I have to this point is a 4X4 wooden =
block. It does the job but I can't help but wonder what it really =
should look like.
Thanks for your time.
Fair Winds,
Bob Hendrickson
S/V Getaway
------=_NextPart_000_0008_01C25C97.2214C9C0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Diso-8859-1">
<META content=3D"MSHTML 6.00.2800.1106" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT face=3DArial size=3D2>Also, to those on the other list who =
have given=20
their inputs, Thank You.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>I have a Triad uni-matic type trailer =
although my=20
boat is a 1976. The bunk boards are indeed large, and they sit =
somewhat=20
outboard where the hull has turned about 45 degrees up. They do =
not sit=20
UNDER the hull per-se but are more angled. I have noticed that =
they do=20
bend under load to conform to the shape of the hull there.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>There is but one cross member in the=20
keel area but it does not appear that there was ever a support =
bracket=20
there, however, just aft of the cross member, there are two holes in the =
angled=20
cross members ( the cross members which run at a 30 degree angle (or so) =
back to=20
the aft corners). I surmise that these holes had a roller =
pin between=20
them at one time, but they are well aft of the first cross member and =
well aft=20
of where I would logically place the weight of the boat. For now, =
I have a=20
4X4 wooden block attached to the first cross member and it seems to do =
an=20
adequate job.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>But you can see why I am curious what =
it SHOULD=20
look like so I can get mine right.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Fair Winds,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Bob Hendrickson<BR>S/V =
Getaway</FONT></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A title=3Drhendy@earthlink.net =
href=3D"mailto:rhendy@earthlink.net">rhendy</A>=20
</DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A =
title=3Drhodes22-list@rhodes22.org=20
href=3D"mailto:rhodes22-list@rhodes22.org">Rhodes List</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Sunday, September 15, =
2002 8:42=20
AM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> [Rhodes22-list] =
Trailer=20
Photos???</DIV>
<DIV><BR></DIV>
<DIV><FONT face=3DArial size=3D2>All,</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> I am making the request, =
again. Does=20
anyone have a photo of the area of their trailer which supports the=20
keel? I am trying to re-create this area on my =
trailer. All I=20
have to this point is a 4X4 wooden block. It does the job but I =
can't=20
help but wonder what it really should look like.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2> Thanks for your =
time.</FONT></DIV>
<DIV><FONT face=3DArial size=3D2></FONT> </DIV>
<DIV><FONT face=3DArial size=3D2>Fair Winds,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Bob Hendrickson<BR>S/V=20
Getaway</FONT></DIV></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0008_01C25C97.2214C9C0--