[Rhodes22-list] True confessions........topic: woodwork.

[John Tonjes]

About two years ago we were all discussing our different methods of taking
care of the teak trim and our favorite brands. Some used the traditional
teak oil method while others opted for the cetol. I on the other hand chose
to use the WM version of cetol in gloss. I am happy to report that the
product is a complete bust. After carefully preparing the wood I applied
three layers with tender loving care. In less than a year more than 50% of
the product had come off and needed refinishing, but being one that would
rather sail than work on the boat I waited another year.
I have sanded back down to the original teak and this year I'm putting four
coats of Spar Varnish on it. Last year I replaced the kick plate in the
cockpit with a piece of teak that I finished with varnish and after one year
it looks great.
I know everyone says not to varnish teak, but it looks great and so far has
held up very well. The varnish I am using has ten times the UV protection
that standard varnish has, so that might explain why it's holding up.
I was just wondering how the other products are doing that were used?
 
Rummy