[Rhodes22-list] To Stan @ GBI

[Saroj]

Wow! You are working for them already!  You ought to be a technical
salesperson with a fat commission built in.  Good Luck!

Saroj
----- Original Message -----
From: "Roger Pihlaja" <cen09402 at centurytel.net>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Friday, May 09, 2003 8:18 PM
Subject: [Rhodes22-list] To Stan @ GBI


Dear Stan,

If you've been following the list this week; then, you know I had a job
interview with Isotec International, Inc. down in Canton, GA.  Isotec is in
the urethanes business.  I'm writing to you to let you know about a series
of Isotec products intended for the recreational marine industry.  The
following link will take you to the appropriate page on Isotec's website:

http://www.isotecintl.com/industry/pleasureboats.htm

Does your manufacturing facility bump up against VOC emission limits down
there in N. Carolina?  Are your styrene emissions limiting your ability to
produce product or expand your operations?  If so, then you might be
particularly interested in Isotec's ACRYLOBOND-EXP product, a two-component
polyurethane designed to be an environmentally friendly, drop-in replacement
for the polyester resins currently used.  As a polyurethane, I would imagine
the UV resistance, impact and abrasion resistance, flexibility & resistance
to crazing, & resistance to osmotic blistering would also be much better.
What would you think about polyurethane/glass fiber reinforced Rhodes 22's?

Your committment to continuous improvement of our R-22's is well known.
When I saw the spec sheet for this product, I immediately though of you.

I don't know about relative cost of the Isotec product vs. the polyester
resins you currently use.

Roger Pihlaja
S/V Dynamic Equilibrium
__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list