[Rhodes22-list] New Lines

[Slim]

Thanks, Jerry, and right about last year's snag.  It'll be a few weeks
before I get to it but I'll let you know how/when it happens.
Thanks again,
Slim

On 6/7/06 9:31 PM, "cjlowe" <cjlowe at bright.net> wrote:

> Slim,
> 
> As I recall, you do have to pull the IMF furling tube out of the mast far
> enough for the "spool" (the space between the two bearings,that the line
> wraps up on) to clear the bottom of the mast.While you have it out that far,
> check the top and bottom bearings to make sure they aren't cracked where the
> screws thread in,on the top and bottom of both bearings.
> And while you've gone this far, remember that screw  that holds the thrust
> bearing on the bottom of the furling tube. You know,the one that caught you
> dropping the soap in the shower,last year. You might think about putting a
> longer one in it's place.
> 
> Just something to think about,
> 
> Jerry Lowe
> 
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list