[Rhodes22-list] Downhaul rigging revisited--Big Picture

[Rory Orkin]

Smaller previous picture is where Rudder downhaul line exits the rudder
housing

http://www.nabble.com/file/7273/E27C2146.JPG 




Rory,
I'm not sure what I'm looking at either.  Perhaps another picture showing
the "big picture"? - rob

----- Original Message ----- 
From: "Rory Orkin" <roryorkin at earthlink.net>
To: <rhodes22-list at rhodes22.org>
Sent: Monday, March 19, 2007 10:54 AM
Subject: [Rhodes22-list] Downhaul rigging revisited


>
>   A while back I posted a question about the downhaul which resulted in a
> discussion about a turning bar which had been installed incorectly on some
> boats.
>             I have included a few pictures of the downhaul rigging. The
> rudder pinches the downhaul between the rudder and the back of the rudder
> housing.. Is this how it is supposed to be ? In the second picture I show
> how the turning bar would be installed.. I find that without the turning
bar
> installed I will be pinching the downhaul at the SIDE of the rudder and
> jamming the whole works..  Wouldnt it make more sense to but some guides
on
> the forward  part of the rudder assembly and run the line down and outside
> so the rudder never pinches the line ?
>
>   http://www.nabble.com/file/7270/E27C2142.JPG
> http://www.nabble.com/file/7269/E27C2143.JPG
> -- 
> View this message in context:
http://www.nabble.com/Downhaul-rigging-revisited-tf3427541.html#a9553642
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list


__________________________________________________
Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list

-- 
View this message in context: http://www.nabble.com/Downhaul-rigging-revisited-tf3427541.html#a9558100
Sent from the Rhodes 22 mailing list archive at Nabble.com.