[Rhodes22-list] Jack stand question for Slim

[bill davidge]

Slim

  Slim thanks for the info.,But I'm  still not  sure were and how you put
the tembers under the Bow?
   Do you have a picture?

  Bill Davidge

On Fri, Apr 4, 2008 at 12:45 AM, Steven Alm <stevenalm at gmail.com> wrote:

> Ron,
>
> Sorry the late reply--I've been out.  I don't know off hand what my boat
> stands measured.  They and the boat are in storage and inaccessible.  But
> the minimum can be higher than the stern when it's on the trailer.  With
> jacks on all three corners of the trailer, I raise the trailer as high as
> it
> goes (just about off its wheels) and then put the stands in place, block
> up
> the bow with heavy timbers and lower the trailer down.  Then crank up the
> boat stands and you should have plenty enough room to paint.  Sorry I
> don't
> have the measurement but mine might be different from your boat on your
> trailer.  Measure from the ground to the hull to get your minimum.
>
> Slim
>
> On Mon, Mar 31, 2008 at 10:24 AM, Ron Singerman <sail at tds.net> wrote:
>
> > Slim,
> >
> > What size (height) West M jackstands do you use on Fandango when
> painting
> > the bottom as in your previous post of 24 Jul 07?
> >
> > Thanks,
> >
> > >>ron<<
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>