[Rhodes22-list] Flooring and Shelving

[Hank]

Lou,

The photo didn't come through.  Could you try sending it direct to
hnw555 at gmail.com?

Thanks,

Hank


On 1/28/08, Lou Rosenberg <lsr3 at nyu.edu> wrote:
>
> Hank
>
> I have recently replaced my galley shelf and stringer below.  I used
> clean pine 3/4" for the shelf and
> got a sheet of the woodgrain laminate that was also used on my galley
> top and relaminated the top and shelf at the same time.  I used epoxy to
> seal the underside of the shelf and the galley top.
> Replacing the stringer was more difficult and I also saturated it with
> epoxy when it was finally installed.
>
> I've tried to attach a picture lets see if this works.
> Lou
> > Hello fellow Rhodies,
> >
> > I need to replace the bottom shelf in our galley as the old one has
> > completely rotted out.  I was thinking of using a Marine Grade plywood
> for
> > this and then using the rest of the sheet to replace my cabin floor as
> it is
> > not in the greatest shape, either.
> >
> > Any recommendations on the best way to get this done?  What is a good
> > supplier for the plywood?  Any tricks or concerns I should be aware of
> > before I start?
> >
> > Thanks in advance,
> >
> > Hank
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>