[Rhodes22-list] Standard Mast PT slider

[Arthur H. Czerwonky]

Rob,
Thank you - I'd sure like to see them.  Where are you sailing your boat this summer?
Art
-----Original Message-----
>From: "Lowe, Rob" <rlowe at vt.edu>
>Sent: Jul 16, 2008 11:55 AM
>To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
>Subject: [Rhodes22-list] Standard Mast PT slider
>
>Art,
>If you need a photo of a standard mast PT slider, I can take a couple
>this weekend.  Does Stan have these parts?  Sure would be a lot easier
>than making one. - rob
>
>According to Dwyer, this is the standard mast:
>http://www.dwyermast.com/items.asp?cat1ID=20&cat1Name=Masts&familyID=40&
>familyName=DM%2D6+Mast
>
>they don't seem to have the gooseneck/slider that Stan uses, but the
>basic configuration is like the D17 and D11 styles shown mid way down
>this page.  You can see how the slider would fit in the slot of the
>mast. - rob
>
>http://www.dwyermast.com/items.asp?cat1ID=40&cat1Name=Hardware&familyID=
>17&familyName=Goosenecks
>
>
>
>
>-----Original Message-----
>From: rhodes22-list-bounces at rhodes22.org
>[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Arthur H.
>Czerwonky
>Sent: Wednesday, July 16, 2008 10:40 AM
>To: The Rhodes 22 Email List
>Subject: Re: [Rhodes22-list] Mast Boom Car temp pin
>
>John,
>The threading could possibly help, a little snug in the pin hole.  You
>could lost a smooth surfaced pin, possibly by just by slipping out.  The
>length could be estimated by mk1 eyeball.  Do you have a picture of your
>PT slider for your conventional mast?  I may need to remake one myself.
>Thx,
>Art
>
>
>__________________________________________________
>To subscribe/unsubscribe or for help with using the mailing list go to http://www.rhodes22.org/list
>__________________________________________________