[Rhodes22-list] Thru hull fitting

[Frank Tugwell]

All thru-hull hoses below the waterline should be double clamped, with the clamps in opposite directions.


Frank Tugwell
President and CEO
Winrock International

franktugwell.tel

Sent from my iPad

On Mar 20, 2011, at 8:51 PM, cowie <ccowie at cowieassociates.com> wrote:

> 
> I recently replaced my sink and in the process pulled the sink drain hose off
> the thru hull fitting.  I notice that the drain hose from the sink to the
> thru hull fitting has hose inside a hose that I suppose allows the pipe size
> from the sink drain to reduce and fit the thru hull fitting. Put a bunch of
> sealant on the hose and reattached with a hose clamp at the thru hull
> fitting.  Is this the standard set up for the sink or should I replace it
> with something else?
> -- 
> View this message in context: http://old.nabble.com/Thru-hull-fitting-tp31197150p31197150.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> 
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________