[Rhodes22-list] deck thickness on older r22?

[R22RumRunner at aol.com]

>From the factory, all cabin top and deck hardware is attached with  
stainless bolts. The holes are drilled and then tapped for the bolts. A  good 
bedding compound is used prior to installing the hardware. 
 
Rummy
 
 
In a message dated 2/9/2014 7:31:08 P.M. Eastern Standard Time,  
steverayj at hotmail.com writes:

Thanks  for the great info. Interesting about a possible gap  between
liner/skin/core.

I will also be adding a cam cleat on the  cabintop instead of just the cleat
for the furling line. Do you think  screws (epoxied in?) will be solid
enough? (The cleat is just screwed in  and is solid). Is the cabintop also
about 1" ply?

Thanks again,  Steve



-----
Fair winds and following seas .....  Steve  Raye
--
View this message in context:  
http://rhodes-22.1065344.n5.nabble.com/deck-thickness-on-older-r22-tp47467p47470.html
Sent  from the Rhodes 22 mailing list archive at  Nabble.com.
__________________________________________________
To  subscribe/unsubscribe go to  
http://www.rhodes22.org/mailman/listinfo/rhodes22-list

For the list  Charter and help with using the mailing list and archives go 
to  http://www.rhodes22.org/list
__________________________________________________