[Rhodes22-list] Servicing a centerboard from inside on the trailer

[Luis Guzman]

Talbot,

I’m also looking for the neoprene to make the gasket. My boat is a ’82, and the 5 feet length is fine.

Anyway, let me know what you find, and if I find something I’ll let you know.


Luis A. Guzmán II
http://www.TropicalMinds.com
941 580-1577

S/V Aquetxali

> On Apr 24, 2018, at 4:46 PM, talbotpratt <talbotpratt at gmail.com> wrote:
> 
> Hi Mike,
> Thanks again for the info on the neoprene. The link no longer works, but the
> part number does at McMaster. Unfortunately it's for a 6" width of 3/16" .
> My gasket is 7", measured twice, and when I looked at what 6" would cover,
> and its not enough, barely 1/2" past the holes, and way in from the edge.  
> Anyone know where you can find this wider material?  Current Gasket is 53.75
> x 7 x 3/16". 
> Mike, I'll bet my fiberglass flange was cut wider that yours.  It looks hand
> done and kind of wavy.  
> Thanks, Talbot
> 
> 
> 
> -----
> Talbot Pratt
> S/V  "Remains Nameless"
> Red bank, NJ  978 801 1602
> --
> Sent from: http://rhodes-22.1065344.n5.nabble.com/
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________