[Rhodes22-list] Spreader bolt / washer - pop top slider pin

[Cary Tolbert]

? ? You can remove and replace the IMF mainsail without touching the
spreaders.
Cary
Claytor Lake, VA

On Wed, May 18, 2022, 2:53 PM DAVID BERG via Rhodes22-list <
rhodes22-list at rhodes22.org> wrote:

> Rick,
>
>
>
> I’ve seen that answer here before, but it doesn’t seem correct! Perhaps.
> Does the IMF have to come out to replace them?
>
>
>
> Dave
>
>
>
> From: Rick Lange <sloopblueheron at gmail.com>
> Sent: Wednesday, May 18, 2022 1:50 PM
> To: DAVID BERG <davidmberg at mac.com>; The Rhodes 22 Email List <
> rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] Spreader bolt / washer - pop top slider pin
>
>
>
> Hi David,
>
>
>
> Your washers are "tapered" because they have been deformed.  Any hardware
> store has nylon replacements.
>
>
>
>
> Regards,
>
> Rick Lange
>
>
>
>
>
> On Wed, May 18, 2022 at 2:46 PM DAVID BERG via Rhodes22-list <
> rhodes22-list at rhodes22.org <mailto:rhodes22-list at rhodes22.org> > wrote:
>
> Good afternoon,
>
> I need to replace the tapered washers and possibly the bolts for my
> spreaders. I only inspected briefly, and in the rain, but it appears that
> the IMF must be removed to do this work. I'm assuming these are Dwyer
> parts.
>
> I also need a new spring detent pin, or whatever you call the thing that
> releases the pop top carriage (or the boom carriage for that matter).
>
> Any advice would be greatly appreciated.
>
> David Berg
> Blue Loon
> Minneapolis
>
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: image2.jpeg
> Type: image/jpeg
> Size: 58230 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20220518/998f9621/attachment.jpeg
> >
>
>