[Rhodes22-list] Mast step issues?

[Michael D. Weisner]

Unfortunately, rot is likely to be present under the floor, below the compression post. Check the stringers near the post as they tend to remain moist if your bilge holds rain water. There are many emails in the archives regarding replacing the under cabin sole structure. Temporarily, you maybe able to place some wood blocks and a piece of plywood under the post to enable the proper transfer of force to the hull.

Mike
s/v Wind Lass ('91)
Nissequogue River, NY
I’d rather be sailing :~)

-----Original Message-----
From: Rhodes22-list <rhodes22-list-bounces at rhodes22.org> On Behalf Of Ric Stott
Sent: Wednesday, June 26, 2024 12:55 PM
To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
Subject: Re: [Rhodes22-list] Mast step issues?

The compression post on the R22 is not directly under the mast - but it’s close enough to do the job because the cabin top is made of thick plywood. 
>From y experience wit h da list, the bottom of the compression post is susceptible to rot. 
Check the bottom of your post. 
Ric 
Dadventure 

Richard F. Stott, AIA, LEED AP 
ric at stottarchitecture.com
O -631-283-1777
C- 516-965-3164