[ham] Re: [Rhodes22-list] was Politics on the list. now Todd's traveler

[Michael Meltzer]

he uses the next size up SS tube, drill a hole for the stays to go thought, an other set to pin the "bar" into the "cups" using a
fast pin.

MJM

----- Original Message ----- 
From: "Todd Tavares" <sprocket80 at mail.com>
To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
Sent: Thursday, November 27, 2003 12:38 AM
Subject: [ham] Re: [Rhodes22-list] was Politics on the list. now Todd's traveler


> Steve,
>
>     I know this was probably a trivial question and not really critical.  As long as the traveler is high enough to clear the
tiller with comfort.  I save almost every pic that is posted if I think I can get some future info to help me with the restoration,
especially now since I have 2 R22's to restore.  I see from these pics that Roger's traveler is much higher and has less travel.
>
>    I cannot find the same style end caps that Stan uses in 1", so I will have to get creative.
>
> But not having the mast up now,  I wanted to make the tube long enough to span the distance between the backstays, keeping it high
enough, while getting maximum travel with out having to break out the TI-82 :-)  But about 58" - 60" long and 24" up from the chain
plates should be in the ballpark.
>
> Besides,  I wanted Fred to have some enjoyable boat posts to peruse. ;-)
>
> Todd
>
>
>
> ----- Original Message -----
> From: Steve Alm <salm at mn.rr.com>
> Date: Wed, 26 Nov 2003 14:25:51 -0600
> To: Rhodes <rhodes22-list at rhodes22.org>
> Subject: Re: [Rhodes22-list] was Politics on the list. now  Todd's traveler
>
> > 13 holes for adjustment?  ...Huh?  Since my 1990 R22 is put to bed for the
> > season, I can't give you any dimensions, but my 1" OD traveler bar fits into
> > 1" ID caps that are attached to the back stays and held in place with a pin
> > through a single hole.
> >
> > Slim
> >
> > On 11/26/03 9:28 AM, "Todd Tavares" <sprocket80 at mail.com> wrote:
> >
> > > Thanks Jerry!
> > >
> > >
> > > ----- Original Message -----
> > > From: "cjlowe" <cjlowe at bright.net>
> > > Date: Tue, 25 Nov 2003 23:15:35 -0500
> > > To: "The Rhodes 22 mail list" <rhodes22-list at rhodes22.org>
> > > Subject: Re: [Rhodes22-list] was Politics on the list. now  Todd's traveler
> > >
> > >> Todd,
> > >>   I have an 86 with IMF. The traveler is 59 5/8 " long, of 1" tubing.The
> > >> distance between the center of the eye of the swedged fitting and the center
> > >> of the traveler tubing is 15". The eye attaches the a U shaped bracket 4
> > >> 1/4" long ,with 13 holes in it for adjustment. If you need anything else
> > >> just holler
> > >>   Jerry
> > >>
> > >> __________________________________________________
> > >> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> > >>
> >
> > __________________________________________________
> > Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
> >
>
> -- 
> ___________________________________________________________
> Sign-up for Ads Free at Mail.com
> http://promo.mail.com/adsfreejump.htm
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>