[Rhodes22-list] Mast Crutch

[Steve Alm]

On the other hand, you might be able to order one from Stan.  Have you
checked with him?

On 5/11/04 1:59 PM, "Steve Alm" <salm at mn.rr.com> wrote:

> John,
> I wish I had a better picture of my mast crutch for you--this one
> doesn't show too much detail--but this is the GB design for lowering
> the mast to the stern.  At the bottom, the two aluminum tubes are
> attached to plastic (plywood could be used) pieces that are notched to
> fit over the transom.  The transom bears the weight--not the rail.
> There is a horizontal piece of the same material with a cutout that
> fits over the stern rail and stern light.  This adds stability.  Then
> there are two lines coming down from the top that tie to the stern
> cleats which add even more stability.  If I get a chance, I'll take
> more pixs and post them.
> 
> Hope this helps,
> Slim
> 
> 
> 
> Name: PA15401239907.jpg Type: image/jpeg Size: 244755 bytes Desc: not
> available
> Url: 
> http://www.rhodes22.org/pipermail/rhodes22-list/attch/200405/11/PA15401239907.
> jpg
> 
> 
> Trailer-2
> 
> 
> 
> 
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list