[Rhodes22-list] pop-top enclosure snap locations

[Hank]

Art,

That's what we like about you.  Short and to the point! LOL

Hank


On 6/9/08, Arthur H. Czerwonky <czerwonky at earthlink.net> wrote:
>
> Chet
>
> -----Original Message-----
> >From: chetc <cclocksin at buckeye-express.com>
> >Sent: Jun 9, 2008 2:17 PM
> >To: rhodes22-list at rhodes22.org
> >Subject: [Rhodes22-list]  pop-top enclosure snap locations
> >
> >
> >I am trying to fit up a used Pop-Top enclosure from Stan the Man, and our
> >boat doesn't have the "studs" for the enclosure. Stan says it is easiest
> to
> >put the studs on the cabin top first, and then put snaps in the enclosure
> in
> >the matching location. Reason for this method is to keep the studs on the
> >cabin top all looking neat and straight, since you see them all of the
> time.
> >Sounds good, and I think I'll try that, but I wanted to ask if anybody out
> >there who has a PTE could post a couple of pictures of the stud/snaps on
> the
> >boat so I can at least get a rough idea of where to locate them (ie: 1/2"
> >down from the top of the cabin?)...and, since the enclosure has snaps
> >already...I might try to place studs on the boat to match at least some of
> >the snaps (corners?) that are already installed on the enclosure.
> >
> >I was finally able to take the enclosure down to the boat to see if it
> looks
> >like it will work, and it sure will, but it could be trick to get the
> studs
> >on correctly so that it fits snug. Anybody done this?
> >--
> >View this message in context:
> http://www.nabble.com/pop-top-enclosure-snap-locations-tp17738687p17738687.html
> >Sent from the Rhodes 22 mailing list archive at Nabble.com.
> >
> >__________________________________________________
> >Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>
> __________________________________________________
> Use Rhodes22-list at rhodes22.org, Help? www.rhodes22.org/list
>