[Rhodes22-list] V-berth base movement

[Ellyn and Sam Moore]

A simple solution, and it would allow the same access to the compartment below.
I don't want to abrade the unprotected foam, so I'm thinking of covering the ledge
with something.......
Sam Moore, '77R22

On Jan 14, 2013, at 10:01 PM, cjlowe wrote:

> Sam,
> 
>  On my '86 there is a piece of wood,about 1" thick,3" wide and 1 foot
> long,screwed to the plywood bottom of each half of the cushions. It goes in
> the hole for the water tank, battery area,just before the raised part of the
> bow area. If thecushion trys to slide forward , it hits the fiberglass bow
> and stops forward motion.  You could also screw another piece of wood  on
> the forward side of the piece that is supposed  to support the back of the
> cushions,so the cushions can't go far enought forward to let the back fall
> off.
> 
> Jerry Lowe
> 
> 
> 
> --
> View this message in context: http://rhodes-22.1065344.n5.nabble.com/V-berth-base-movement-tp44855p44885.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list
> 
> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list
> __________________________________________________