[Rhodes22-list] Laz Project Part Duex

[Chris Geankoplis]

One of the reasons that I made the anchor holder in the Laz was to avoid
the anchor or chain from sliding to port and shorting out the terminal
block mounted on the hull lifting tube.  This block is associated with the
electric lift system, so if you have a power lift system you might have the
same problem.  With the fuel line passing quite near the terminals, there
is a potential for an insurance claim (grin).  Attached is a PDF with a
short explanation and some pictures illustrating the project.  Hope this
helps someone avoid fireworks in the laz.

Chris Geankoplis
Enosis
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Making a Protective Cover for the Motor Lift Terminal Block in the Laz.pdf
Type: application/pdf
Size: 316641 bytes
Desc: not available
URL: <http://rhodes22.org/pipermail/rhodes22-list/attachments/20200921/5c427e00/attachment.pdf>