[Rhodes22-list] Laz Project Part Duex

[Tom Van Heule]

Sorry, I am dense at times,
Why use the laz for this when you deploy anchor from the bow? Do not all
r22 have a drawer in the vberth?

I saw what peter N. ( S/V Silverheels) did with his anchors, and that makes
more sense to me than fabrication in the laz? Also weight stern?

Thanks for enduring me,
TVH


On Mon, Sep 21, 2020, 5:34 PM Chris Geankoplis <chrisgeankoplis at gmail.com>
wrote:

> One of the reasons that I made the anchor holder in the Laz was to avoid
> the anchor or chain from sliding to port and shorting out the terminal
> block mounted on the hull lifting tube.  This block is associated with the
> electric lift system, so if you have a power lift system you might have the
> same problem.  With the fuel line passing quite near the terminals, there
> is a potential for an insurance claim (grin).  Attached is a PDF with a
> short explanation and some pictures illustrating the project.  Hope this
> helps someone avoid fireworks in the laz.
>
> Chris Geankoplis
> Enosis
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: Making a Protective Cover for the Motor Lift Terminal Block in the
> Laz.pdf
> Type: application/pdf
> Size: 316641 bytes
> Desc: not available
> URL: <
> http://rhodes22.org/pipermail/rhodes22-list/attachments/20200921/5c427e00/attachment.pdf
> >
>